Towards Polysulfuric Acids: The Hydrogentrisulfate Anion [HS3O10]− in A[HS3O10] (A=Na,K, Rb)

The reaction of Na₂SO₄ and K₂SO₄ with fuming sulfuric acid (65 % SO₃) yielded colorless extremely sensitive crystals of Na[HS₃O₁₀] (monoclinic; P2₁/n (No. 14); Z=4; a=707.36(2), b=1378.56(4), c=848.10(3) pm; β=94.817(1)°; V=824.09(4) ? 10⁶ pm³) and K[HS₃O₁₀] (orthorhombic; Pccn (No. 56); Z=4; a=1057.16(3), b=807.81(2), c=897.57(2) pm; V=766.51(3) ? 10⁶ pm³). The analogous rubidium compound Rb[HS₃O₁₀] (orthorhombic; Pnma (No. 62); Z=4; a=891.43(3), b=1095.34(4), c=839.37(3) pm; V=819.58(5) ? 10⁶ pm³) originates from the reaction of Rb₂CO₃ and SO₃. All of the different structures contain the hitherto unknown anion [HS₃O₁₀]^? and are stamped by strong hydrogen bonds linking the anions either to dimers or chains. Theoretical investigations by DFT methods give further insight in the structural characteristics of [HS₃O₁₀]^?. The preparation of the [HS₃O₁₀]^? anion can be seen as an important milestone on our way to the still elusive polysulfuric acids.     

附加压力与分散系统的稳定性

较详细地讨论了附加压力与分散系统稳定性间的关系,指出分散相附加压力的降低是分散系统趋向稳定的根本原因。以乳状液为例,附加压力降低不仅减少了液滴间相互碰撞的概率,而且更重要的是,它与液滴表面形成牢固的保护膜密切相关。只有当液滴的附加压力趋近0时,分散系统才达到热力学上稳定的状态,此时乳状液已变成了微乳状液。上述讨论也基本适用于固/液分散系统。     

Synthesis and liquid crystalline behavior of bulky poly(methacrylamide)s

N‐(Bis(4‐(2‐ethylhexyloxy)phenyl)(phenyl)‐methyl)methacrylamide was synthesized and polymerized via reversible addition‐fragmentation chain‐transfer (RAFT) polymerization. The chain‐transfer agent (4‐cyano‐4‐(phenylcarbonothioylthio) pentanoic acid (CPADB)), combined with a chiral additive, and a radical initiator yielded polymers with dispersities between 1.2 and 1.4. At low concentrations, the polymers are soluble in hexanes and chloroform while at higher concentrations they swell in these solvents. Characterization of the polymers by wide‐angle X‐ray scattering (WAXS) revealed an interplanar distance of 19.0 Å. The WAXS data combined with polarized optical microscopy support a lamellar crystallization and lyotropic liquid crystalline behavior in hexanes and chloroform. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2563–2568     

Flexible Structures Based on a Short Pitch Cholesteric Liquid Crystals

We report on the realization and characterization of electro-responsive and pressure sensitive polydimethylsiloxane (PDMS) conductive photonic structures combined with the reconfigurable properties of short pitch cholesteric liquid crystals (aligned in Grandjean configuration). By combining ion-implantation process and surface chemistry functionalization, we have overcome the insulating properties of PDMS and induced long range organization of cholesteric liquid crystals, thus controlling both diffraction and selective Bragg reflection of light by means of external perturbations (electric field, pressure). We have characterized our devices in terms of morphological, optical and electro-optical properties.     

双电极法现场快速检测地下水和湖水中碳酸氢根和碳酸根

地下水和湖水中碳酸氢根( HCO-3)和碳酸根( CO2-3)含量是地球化学碳行为和碳循环的重要表征,但两种离子的浓度易受环境影响而改变,因此,地下水和湖水中HCO-3和CO2-3真实含量的测定一直是个难题。实验利用CO2的水解平衡,通过pH电极和二氧化碳电极联用,建立了HCO-3和CO2-3现场快速测定的新方法,解决了地下水和湖水中HCO-3和CO2-3真实含量的测定难题。研究结果表明,在pH=4.8±0.1的底液中, HCO-3和CO2-3的线性范围分别为0.027~570 mg/L和1.25×10-8~39.7 mg/L。共存的金属离子、强酸阴离子(K+、Na+、Mg2+、Cl-、SO2-4,100 mg/L)、弱酸阴离子和弱酸(HSO-3、NO-2、HOAc,50 mg/L)对测定干扰小于5%。实际水样加标实验回收率在95.2%~99.2%之间,相对标准偏差为2.6%~3.7%。与酸碱滴定法进行对比,本方法的准确性良好。但方法受温度影响,因此标准溶液与样品应在同一温度下测量。总体而言,双电极法灵敏、快速、经济且电极携带方便、操作简单、对环境要求不高,十分适合现场和室内一般自然水体的快速检测。本方法已成功应用于青海省地下水和青海湖湖水中HCO-3和CO2-3的现场测定。实验表明,海东地区地下水样品pH在6.4~7.4之间,HCO-3含量为234~4096 mg/L,CO2-3含量为0.16~1.89 mg/L；青海湖湖水样品pH≈8.7,HCO-3含量范围在1.36~1.86 g/L,CO2-3含量在32.3~43.9 mg/L,与文献结果吻合。     

Metal-free phthalocyanine single crystal: Solvothermal synthesis and near-infrared electroluminescence

A metal-free purple H₂Pc single crystal was synthesized by a facile solvothermal method, and its solubility and near-infrared (NIR) optical properties were also investigated due to its potential applications as a light-emitting layer for OLEDs. The H₂Pc single crystal is insoluble in 1-chlorine naphthalene and other organic solvents. It gives a wide absorption in the range from 620 nm to 679 nm and a wide emission in near 922 nm. As an active light-emitting layer, H₂Pc was employed to fabricate electroluminescent (EL) devices with a structure of ITO/NPB (30 nm)/Alq₃:H₂Pc (30 nm)/BCP (20 nm)/Alq₃ (20 nm)/Al. The emission center is at 936 nm when the H₂Pc doping concentration is 20 wt%. The doping concentration strongly governs the emission intensity. When doping concentration decreases from 10 wt% to 1 wt%, the emission intensity remarkably fades, and simultaneously the emission center undergoes a blue shift.     

Using PDMS coated TFC-RO membranes for CO2/N2 gas separation: Experimental study,modeling and optimization

Thin film composite (TFC) reverse osmosis (RO) membranes are semipermeable membranes that are utilized in water purification or water desalination systems. Discarding these membranes after end-of-life leads to environmental problems. Reusing old TFC-RO membranes is one way to solve this problem. For this reason, in this study, used TFC-RO membranes were coated with polydimethylsiloxane (PDMS) for CO₂/N₂ gas separation application. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) was utilized to confirm the crosslinking of coated PDMS. The morphology of PDMS/TFC-RO membranes was characterized using scanning electron microscopy (SEM). The parameters that can affect performance of prepared membranes (N₂ permeance and CO₂/N₂ selectivity) are concentration of PDMS solution, coating time, solvent evaporation time and curing temperature and time. Given that the used membranes don't have uniform surfaces, the first step of this study was to investigate the effect of the above mentioned factors on virgin membranes using fractional factorial design (FFD) of experiments. The results obtained showed that PDMS concentration is the most significant factor that has a negative effect on N₂ permeance and positive effect on CO₂/N₂ selectivity. The reported CO₂/N₂ selectivity of PDMS membranes was 11–12, but this selectivity for prepared PDMS/TFC-RO membranes was in the range of 6.7–22.5. After determining optimum conditions, the gas separation performance of PDMS coated used TFC-RO membrane under these conditions was finally determined. The results showed that the used membranes had a better performance than virgin membranes.     

Intermolecular Stetter reaction of aromatic aldehydes with (E)-(2-nitrovinyl)cyclohexane induced by N-heterocyclic carbene and thiourea

Intermolecular Stetter reaction of aromatic aldehydes with (E)-(2-nitrovinyl)cyclohexane catalyzed by thiazolium A has been developed. The reaction rate and efficiency are profoundly impacted by the presence of thiourea B. The reaction affords moderate to good yields of the Stetter product. Some factors influencing yield were discussed.     

Importance of the Correlation between Width and Length in the Shape Analysis of Nanorods: Use of a 2D Size Plot To Probe Such a Correlation

Analysis of nanoparticle size through a simple 2D plot is proposed in order to extract the correlation between length and width in a collection or a mixture of anisotropic particles. Compared to the usual statistics on the length associated with a second and independent statistical analysis of the width, this simple plot easily points out the various types of nanoparticles and their (an)isotropy. For each class of nano‐objects, the relationship between width and length (i.e., the strong or weak correlations between these two parameters) may suggest information concerning the nucleation/growth processes. It allows one to follow the effect on the shape and size distribution of physical or chemical processes such as simple ripening. Various electron microscopy pictures from the literature or from the authors′ own syntheses are used as examples to demonstrate the efficiency and simplicity of the proposed 2D plot combined with a multivariate analysis.